#!/bin/bash

# Post install script for Fedora
# Author: Jacob Schantli
# Version: 1.1

# Make a pipeline fail if any command in it fails. Without this,
# `curl ... | bash` reports success even when the download fails.
set -o pipefail

# Steps that failed during this run (shown in the summary at the end)
FAILED_STEPS=()

# -----------------------------------------------------------------------------
# Global Configuration
# -----------------------------------------------------------------------------

DNF_PACKAGES=(
    "gnome-tweaks"
    "steam"
    "lutris"
    "btop"
    "fastfetch"
    "distrobox"
    "pipx"
    "bash-completion"
    "tar"
    "bat"
    "tree"
    "unzip"
    "git"
    "fzf"
    "mpv"
    "fuse"
    "fuse-libs"
    "nodejs"
)

FLATPAK_PACKAGES=(
    "com.github.tchx84.Flatseal"
    "net.nokyan.Resources"
    "com.mattjakeman.ExtensionManager"
    "io.github.realmazharhussain.GdmSettings"
    "com.ranfdev.DistroShelf"
    "it.mijorus.gearlever"
    "io.github.fastrizwaan.WineZGUI"
    "com.vysp3r.ProtonPlus"
    "io.missioncenter.MissionCenter"
    "io.github.peazip.PeaZip"
    #"app.devsuite.Ptyxis"
    "re.sonny.Junction"
    #"com.github.rafostar.Clapper"
    "io.github.flattool.Ignition"
    "io.github.swordpuffin.rewaita"
    "page.tesk.Refine"
    #"io.gitlab.adhami3310.Converter"
    "com.usebottles.bottles"
    "com.bambulab.BambuStudio"
    "com.collaboraoffice.Office"
    "io.github.kolunmi.Bazaar"
    "com.fastmail.Fastmail"
)

GNOME_EXTENSIONS=(
    "dhruva@narkagni"
    "app-grid-wizard@mirzadeh.pro"
    "appindicatorsupport@rgcjonas.gmail.com"
    "blur-my-shell@aunetx"
    "caffeine@patapon.info"
    "dynamic-music-pill@andbal"
    "gnome-fuzzy-app-search@gnome-shell-extensions.Czarlie.gitlab.com"
    #"IP-Finder@linxgem33.com"
    #"lan-ip-address@mrhuber.com"
    #"update-extension@purejava.org"
    "user-theme@gnome-shell-extensions.gcampax.github.com"
    "gnome-wallpaper-engine@gjs.com.zip"
)

# -----------------------------------------------------------------------------
# Helper Functions
# -----------------------------------------------------------------------------

# Colors for output
GREEN='\033[0;32m'
RED='\033[0;31m'
YELLOW='\033[1;33m'
NC='\033[0m' # No Color

log_info() {
    echo -e "${GREEN}[INFO]${NC} $1"
}

log_error() {
    echo -e "${RED}[ERROR]${NC} $1"
}

log_warn() {
    echo -e "${YELLOW}[WARN]${NC} $1"
}

command_exists() {
    command -v "$1" >/dev/null 2>&1
}

# Check if the last command was successful
check_status() {
    local status=$?
    if [ $status -eq 0 ]; then
        log_info "$1 successful."
    else
        log_error "$1 failed."
        FAILED_STEPS+=("$1")
        # If the second argument is "critical", exit the script
        if [ "$2" == "critical" ]; then
            log_error "Critical error encountered. Exiting."
            exit 1
        fi
    fi
}

# Append text to a file if it doesn't already exist
append_to_file_if_missing() {
    local file="$1"
    local text="$2"
    local description="$3"
    local use_sudo="$4"

    if grep -Fq "$text" "$file"; then
        log_warn "$description already exists in $file. Skipping."
    else
        if [ "$use_sudo" == "true" ]; then
            echo "$text" | sudo tee -a "$file" > /dev/null
        else
            echo "$text" >> "$file"
        fi
        log_info "Added $description to $file."
    fi
}

# -----------------------------------------------------------------------------
# Installation Functions
# -----------------------------------------------------------------------------

optimize_dnf() {
    log_info "----------------------------------------------------"
    log_info "Modifying /etc/dnf/dnf.conf for faster downloads."
    log_info "----------------------------------------------------"

    DNF_CONF="/etc/dnf/dnf.conf"
    if [ -f "$DNF_CONF" ]; then
        append_to_file_if_missing "$DNF_CONF" "max_parallel_downloads=10" "max_parallel_downloads" "true"
        append_to_file_if_missing "$DNF_CONF" "defaultyes=True" "defaultyes" "true"
        append_to_file_if_missing "$DNF_CONF" "keepcache=True" "keepcache" "true"
    else
        log_error "$DNF_CONF not found!"
    fi
    sleep 1
}

install_fonts() {
    log_info "----------------------------------------------------"
    log_info "Installing Microsoft Core Fonts and Meslo Nerd Font."
    log_info "----------------------------------------------------"

    log_info "Updating system and installing prerequisites..."
    sudo dnf upgrade --refresh -y
    check_status "System upgrade" "critical"

    sudo dnf install -y curl cabextract xorg-x11-font-utils fontconfig wget unzip
    check_status "Prerequisites installation" "critical"

    log_info "Installing Microsoft Core Fonts..."
    if rpm -q msttcore-fonts-installer > /dev/null 2>&1; then
        log_warn "Microsoft Core Fonts already installed."
    else
        sudo dnf install -y https://downloads.sourceforge.net/project/mscorefonts2/rpms/msttcore-fonts-installer-2.6-1.noarch.rpm
        check_status "Microsoft Core Fonts installation" "non-critical"
    fi

    log_info "Installing Meslo Nerd Font..."
    FONT_NAME="MesloLGS Nerd Font Mono"
    # Redirect instead of `grep -q` so fc-list isn't killed by SIGPIPE (pipefail)
    if fc-list :family | grep -i "$FONT_NAME" > /dev/null; then
        log_info "Font '$FONT_NAME' is already installed."
    else
        log_info "Installing font '$FONT_NAME'..."
        FONT_URL="https://github.com/ryanoasis/nerd-fonts/releases/latest/download/Meslo.zip"
        FONT_DIR="$HOME/.local/share/fonts"
        TEMP_DIR=$(mktemp -d)

        wget -q -O "$TEMP_DIR/Meslo.zip" "$FONT_URL" \
            && unzip -q "$TEMP_DIR/Meslo.zip" -d "$TEMP_DIR" \
            && mkdir -p "$FONT_DIR/$FONT_NAME" \
            && mv "$TEMP_DIR"/*.ttf "$FONT_DIR/$FONT_NAME/" \
            && fc-cache -f "$FONT_DIR"
        check_status "Meslo Nerd Font installation" "non-critical"
        rm -rf "$TEMP_DIR"
    fi
}

install_repos() {
    log_info "----------------------------------------------------"
    log_info "Adding RPM Fusion repositories."
    log_info "----------------------------------------------------"

    sudo dnf install -y \
      "https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm" \
      "https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm"
    check_status "RPM Fusion repositories installation" "non-critical"
}

install_software() {
    log_info "----------------------------------------------------"
    log_info "Installing most used software."
    log_info "----------------------------------------------------"

    log_info "Installing DNF packages..."
    sudo dnf install -y "${DNF_PACKAGES[@]}"
    check_status "DNF packages installation" "non-critical"

    # Ensure flatpak is set up
    if ! command -v flatpak &> /dev/null; then
        log_info "Flatpak not found. Installing..."
        sudo dnf install -y flatpak
    fi

    log_info "Adding Flathub remote..."
    flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
    check_status "Flathub remote add" "non-critical"

    log_info "Installing Flatpak packages..."
    # One transaction is much faster (single dependency resolution, shared
    # runtimes downloaded once). If it fails, retry one-by-one so a single
    # bad app ID doesn't block the rest.
    if flatpak install flathub -y "${FLATPAK_PACKAGES[@]}"; then
        log_info "Flatpak packages installation successful."
    else
        log_warn "Batch Flatpak install failed. Retrying apps individually..."
        for app in "${FLATPAK_PACKAGES[@]}"; do
            log_info "Installing $app..."
            flatpak install flathub -y "$app"
            check_status "Flatpak $app" "non-critical"
        done
    fi

    log_info "----------------------------------------------------"
    log_info "Installing Homebrew"
    log_info "----------------------------------------------------"

    # Install Homebrew (also detect it when it isn't on PATH yet)
    if command_exists brew || [ -x "/home/linuxbrew/.linuxbrew/bin/brew" ]; then
        log_info "Homebrew already installed."
    else
        log_info "Installing Homebrew..."
        # Download first so a failed download isn't reported as success.
        # NONINTERACTIVE=1 avoids prompts during brew install.
        BREW_INSTALLER=$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh) \
            && NONINTERACTIVE=1 /bin/bash -c "$BREW_INSTALLER"
        check_status "Homebrew installation" "non-critical"

        # Add brew to path for the current session
        if [ -d "/home/linuxbrew/.linuxbrew/bin" ]; then
            eval "$(/home/linuxbrew/.linuxbrew/bin/brew shellenv)"
        elif [ -d "$HOME/.linuxbrew/bin" ]; then
            eval "$($HOME/.linuxbrew/bin/brew shellenv)"
        fi
    fi

}

install_discord() {
    log_info "----------------------------------------------------"
    log_info "Installing Discord"
    log_info "----------------------------------------------------"
    if rpm -q discord > /dev/null 2>&1; then
        log_info "Discord already installed."
    else
        log_info "Downloading and installing Discord..."
        sudo dnf install -y "https://discord.com/api/download?platform=linux&format=rpm"
        check_status "Discord installation" "non-critical"
    fi
}

install_1password() {
    log_info "----------------------------------------------------"
    log_info "Installing 1Password"
    log_info "----------------------------------------------------"
    if rpm -q 1password > /dev/null 2>&1; then
        log_info "1Password already installed."
    else
        log_info "Downloading and installing 1Password..."
        sudo dnf install -y https://downloads.1password.com/linux/rpm/stable/x86_64/1password-latest.rpm
        check_status "1Password installation" "non-critical"
    fi
}

install_PIA() {
    log_info "----------------------------------------------------"
    log_info "Installing Private Internet Access (PIA)"
    log_info "----------------------------------------------------"
    if [ -d "/opt/piavpn" ]; then
        log_info "PIA is already installed."
    else
        log_info "Downloading and installing PIA..."
        PIA_URL=$(curl -s https://www.privateinternetaccess.com/download/linux-vpn | grep -oP 'https://[^\"]+pia-linux-[0-9\.\-]+\.run' | head -n 1)
        if [ -n "$PIA_URL" ]; then
            wget -qO /tmp/pia-linux.run "$PIA_URL"
            chmod +x /tmp/pia-linux.run
            # Run the installer as the current user, letting it prompt for sudo/pkexec if needed
            /tmp/pia-linux.run --quiet --accept
            rm /tmp/pia-linux.run
            check_status "PIA installation" "non-critical"
        else
            log_error "Failed to fetch PIA download URL."
            FAILED_STEPS+=("PIA installation")
        fi
    fi
}

install_cachyos() {
    log_info "----------------------------------------------------"
    log_info "Installing CachyOS kernel"
    log_info "----------------------------------------------------"

    # kernel-cachyos is built for x86-64-v3 CPUs. Ask before installing it on
    # an older CPU, where the new (default) boot entry may not start.
    if ! /lib64/ld-linux-x86-64.so.2 --help 2>/dev/null | grep 'x86-64-v3 (supported' > /dev/null; then
        log_warn "Your CPU does not appear to support x86-64-v3, which kernel-cachyos targets."
        read -p "Install the CachyOS kernel anyway? [y/N]: " reply
        if [[ ! "$reply" =~ ^[Yy]$ ]]; then
            log_info "Skipping CachyOS kernel."
            return
        fi
    fi

    sudo dnf copr enable -y bieszczaders/kernel-cachyos
    check_status "Enabling CachyOS Copr" "non-critical"

    sudo dnf install -y kernel-cachyos kernel-cachyos-devel-matched
    check_status "CachyOS Kernel installation" "non-critical"

    log_info "Installing CachyOS addons"
    sudo dnf copr enable -y bieszczaders/kernel-cachyos-addons
    check_status "Enabling CachyOS Addons Copr" "non-critical"

    sudo dnf swap -y zram-generator-defaults cachyos-settings
    sudo dracut -f
    sudo dnf -y install scx-scheds scx-tools scx-manager ananicy-cpp
    check_status "CachyOS addons installation" "non-critical"
}

install_p03() {
    log_info "----------------------------------------------------"
    log_info "Installing P03 kernel"
    log_info "----------------------------------------------------"

    # The default kernel-p03 build needs x86-64-v3 and won't boot on older
    # CPUs. Those get the x86-64-v2 build (kernel-p03-gcc) instead.
    if /lib64/ld-linux-x86-64.so.2 --help 2>/dev/null | grep 'x86-64-v3 (supported' > /dev/null; then
        P03_PACKAGE="kernel-p03"
    else
        log_warn "CPU lacks x86-64-v3 support. Installing the x86-64-v2 build (kernel-p03-gcc)."
        P03_PACKAGE="kernel-p03-gcc"
    fi

    sudo dnf copr enable -y catpieleaf/kernel-p03
    check_status "Enabling P03 Copr" "non-critical"

    sudo dnf install -y "$P03_PACKAGE"
    check_status "P03 kernel installation" "non-critical"

    # P03 signs itself with a locally generated key. With Secure Boot on, that
    # key must be enrolled or the kernel won't boot.
    if mokutil --sb-state 2>/dev/null | grep -i 'SecureBoot enabled' > /dev/null; then
        log_info "Secure Boot is enabled. Enrolling the P03 signing key..."
        log_info "Pick a one-time password. On the next boot, choose 'Enroll MOK' and enter it."
        sudo mokutil --import /etc/kernel/certs/p03-kernel/mok.der
        check_status "P03 Secure Boot key enrollment" "non-critical"
    fi

    if rpm -q kernel-cachyos > /dev/null 2>&1; then
        log_warn "The CachyOS kernel is also installed. The newest kernel usually boots by default;"
        log_warn "pick the other one from the boot menu if needed."
    fi
    log_warn "P03 uses the PRJC scheduler, so sched_ext schedulers (scx-scheds) likely won't work on it."
}

install_linuxtoys() {
    log_info "----------------------------------------------------"
    log_info "Installing LinuxToys"
    log_info "----------------------------------------------------"
    curl -fsSL https://linux.toys/install.sh | bash
    check_status "LinuxToys installation" "non-critical"
}

install_shell_env() {
    log_info "----------------------------------------------------"
    log_info "Installing Shell Environment (Starship, FZF, Zoxide, MyBash)"
    log_info "----------------------------------------------------"

    # Install Starship
    if command_exists starship; then
        log_info "Starship already installed."
    else
        log_info "Installing Starship..."
        # -y skips the installer's confirmation prompt
        curl -sSL https://starship.rs/install.sh | sudo sh -s -- -y
        check_status "Starship installation" "non-critical"
    fi

    # Install FZF (Fallback if not installed via DNF)
    if ! command_exists fzf; then
        log_info "Installing FZF via git..."
        git clone --depth 1 https://github.com/junegunn/fzf.git ~/.fzf
        ~/.fzf/install --all
    fi

    # Install Zoxide
    if command_exists zoxide; then
        log_info "Zoxide already installed."
    else
        log_info "Installing Zoxide..."
        curl -sSL https://raw.githubusercontent.com/ajeetdsouza/zoxide/main/install.sh | sh
        check_status "Zoxide installation" "non-critical"
    fi

    # Clone MyBash
    log_info "Cloning MyBash configuration..."
    GITPATH="$HOME/.local/share/mybash"
    if [ -d "$GITPATH" ]; then
        rm -rf "$GITPATH"
    fi
    mkdir -p "$HOME/.local/share"

    if git clone https://gitea.schantli.ca/jschantli/mybash.git "$GITPATH"; then
        log_info "MyBash cloned successfully."

        # Link Config
        log_info "Linking configuration files..."
        OLD_BASHRC="$HOME/.bashrc"

        # Check if .bashrc exists in the cloned repo
        if [ -f "$GITPATH/.bashrc" ]; then
            if [ -e "$OLD_BASHRC" ] && [ ! -e "$HOME/.bashrc.bak" ]; then
                log_info "Backing up .bashrc to .bashrc.bak..."
                mv "$OLD_BASHRC" "$HOME/.bashrc.bak"
            fi

            log_info "Linking new .bashrc..."
            ln -svf "$GITPATH/.bashrc" "$HOME/.bashrc"

            # Ensure Starship is initialized in the new .bashrc
            if ! grep -q "starship init bash" "$HOME/.bashrc"; then
                log_warn ".bashrc does not contain starship init. Appending it..."
                echo 'eval "$(starship init bash)"' >> "$HOME/.bashrc"
            fi
        else
            log_error "$GITPATH/.bashrc not found! Skipping .bashrc linking."
        fi

        # Check if starship.toml exists in the cloned repo
        if [ -f "$GITPATH/starship.toml" ]; then
            log_info "Linking starship.toml..."
            mkdir -p "$HOME/.config"
            ln -svf "$GITPATH/starship.toml" "$HOME/.config/starship.toml"
        else
            log_warn "$GITPATH/starship.toml not found! Skipping Starship config linking."
        fi

        # Check if config.jsonc exists in the cloned repo
        if [ -f "$GITPATH/config.jsonc" ]; then
            log_info "Linking config.jsonc..."
            mkdir -p "$HOME/.config/fastfetch/"
            ln -svf "$GITPATH/config.jsonc" "$HOME/.config/fastfetch/config.jsonc"
        else
            log_warn "$GITPATH/config.jsonc not found! Skipping fastfetch config linking."
        fi

        check_status "Linking config files" "non-critical"
    else
        log_error "Failed to clone MyBash repository. Skipping shell configuration."
    fi
}

install_topgrade() {
    log_info "----------------------------------------------------"
    log_info "Installing Topgrade"
    log_info "----------------------------------------------------"

    if command_exists topgrade; then
        log_info "Topgrade already installed."
        return
    fi

    sudo dnf copr enable -y lilay/topgrade
    check_status "Enabling Topgrade" "non-critical"

    sudo dnf install -y topgrade
    check_status "Topgrade installation" "non-critical"
}

install_gnome_extensions() {
    log_info "----------------------------------------------------"
    log_info "Installing GNOME extensions"
    log_info "----------------------------------------------------"

    # Ensure pipx is installed and path is set
    if ! command -v pipx &> /dev/null; then
        log_info "pipx not found. Installing..."
        sudo dnf install -y pipx
        pipx ensurepath
    fi

    # Install gnome-extensions-cli
    log_info "Installing gnome-extensions-cli..."
    pipx install gnome-extensions-cli --system-site-packages
    check_status "gnome-extensions-cli installation" "non-critical"

    # Define the tool path explicitly to avoid 'pipx run' overhead/warnings
    EXTENSION_TOOL="$HOME/.local/bin/gnome-extensions-cli"

    log_info "Installing GNOME extensions..."
    log_info "NOTE: A popup may appear asking you to confirm installation for each extension."
    log_info "If the extension is already installed, no popup will appear."

    for extension in "${GNOME_EXTENSIONS[@]}"; do
        log_info "Processing $extension..."

        # Install (using the direct binary path)
        "$EXTENSION_TOOL" install "$extension"
        check_status "GNOME Extension $extension" "non-critical"

        # Attempt to enable the extension (in case it's installed but disabled)
        log_info "Ensuring $extension is enabled..."
        gnome-extensions enable "$extension"

        # Prompt user to press Enter to continue
        read -p "Press Enter to continue (if a popup appeared, confirm it first)..."
    done
}

install_antigravity() {
    log_info "----------------------------------------------------"
    log_info "Installing Antigravity App, IDE, and CLI"
    log_info "----------------------------------------------------"

    log_info "Installing Antigravity CLI..."
    curl -fsSL https://antigravity.google/cli/install.sh | bash
    check_status "Antigravity CLI installation" "non-critical"

    log_info "Installing Antigravity App and IDE..."
    sudo dnf install -y python3 nautilus-python curl tar
    
    log_info "Fetching latest download URLs from Google..."
    AG_URL=$(curl -s https://antigravity.google/download | grep -oP 'https://[^"]+linux-x64/Antigravity\.tar\.gz' | head -n 1)
    AG_IDE_URL=$(curl -s https://antigravity.google/download | grep -oP 'https://[^"]+linux-x64/Antigravity%20IDE\.tar\.gz' | head -n 1)

    if [ -z "$AG_URL" ] || [ -z "$AG_IDE_URL" ]; then
        log_error "Failed to resolve Antigravity download URLs."
        FAILED_STEPS+=("Antigravity installation")
        return
    fi

    log_info "Installing Antigravity 2.0 App..."
    sudo rm -rf /opt/antigravity
    sudo mkdir -p /opt/antigravity
    if ! curl -sL "$AG_URL" | sudo tar -xz -C /opt/antigravity --strip-components=1; then
        log_error "Failed to extract Antigravity 2.0 App."
        FAILED_STEPS+=("Antigravity installation")
        return
    fi
    sudo ln -sfn /opt/antigravity/antigravity /usr/local/bin/antigravity
    
    sudo mkdir -p /usr/share/applications /usr/share/icons/hicolor/512x512/apps
    
    # Extract icon from app.asar
    if [ -f "/opt/antigravity/resources/app.asar" ]; then
        sudo python3 - /opt/antigravity/resources/app.asar /usr/share/icons/hicolor/512x512/apps/antigravity.png <<'PY'
import json, struct, sys
from pathlib import Path
asar = Path(sys.argv[1])
out = Path(sys.argv[2])
with asar.open('rb') as f:
    f.read(4)
    header_size = struct.unpack('<I', f.read(4))[0]
    f.read(4)
    json_size = struct.unpack('<I', f.read(4))[0]
    header = json.loads(f.read(json_size).decode())
icon = header.get('files', {}).get('icon.png')
if icon:
    with asar.open('rb') as f:
        f.seek(8 + header_size + int(icon['offset']))
        out.write_bytes(f.read(int(icon['size'])))
PY
    fi

    sudo bash -c 'cat > /usr/share/applications/antigravity.desktop' <<EOF
[Desktop Entry]
Name=Antigravity
Comment=Google Antigravity 2.0
Exec=/usr/local/bin/antigravity %U
Icon=antigravity
Terminal=false
Type=Application
Categories=Development;IDE;
StartupNotify=true
StartupWMClass=antigravity
EOF

    log_info "Installing Antigravity IDE..."
    sudo rm -rf /opt/antigravity-ide
    sudo mkdir -p /opt/antigravity-ide
    if ! curl -sL "$AG_IDE_URL" | sudo tar -xz -C /opt/antigravity-ide --strip-components=1; then
        log_error "Failed to extract Antigravity IDE."
        FAILED_STEPS+=("Antigravity IDE installation")
        return
    fi
    sudo ln -sfn /opt/antigravity-ide/antigravity-ide /usr/local/bin/antigravity-ide
    
    # Extract IDE icon from app.asar
    if [ -f "/opt/antigravity-ide/resources/app.asar" ]; then
        sudo python3 - /opt/antigravity-ide/resources/app.asar /usr/share/icons/hicolor/512x512/apps/antigravity-ide.png <<'PY'
import json, struct, sys
from pathlib import Path
asar = Path(sys.argv[1])
out = Path(sys.argv[2])
with asar.open('rb') as f:
    f.read(4)
    header_size = struct.unpack('<I', f.read(4))[0]
    f.read(4)
    json_size = struct.unpack('<I', f.read(4))[0]
    header = json.loads(f.read(json_size).decode())
icon = header.get('files', {}).get('icon.png')
if icon:
    with asar.open('rb') as f:
        f.seek(8 + header_size + int(icon['offset']))
        out.write_bytes(f.read(int(icon['size'])))
PY
    fi

    sudo bash -c 'cat > /usr/share/applications/antigravity-ide.desktop' <<EOF
[Desktop Entry]
Name=Antigravity IDE
Comment=Google Antigravity IDE
Exec=/usr/local/bin/antigravity-ide %F
Icon=antigravity-ide
Terminal=false
Type=Application
Categories=Development;IDE;
StartupNotify=true
StartupWMClass=antigravity-ide
EOF
    
    log_info "Refreshing desktop databases and icon caches..."
    sudo update-desktop-database /usr/share/applications || true
    sudo gtk-update-icon-cache -f -q /usr/share/icons/hicolor || true

    log_info "Antigravity App and IDE installed successfully."
}

# -----------------------------------------------------------------------------
# Main Menu
# -----------------------------------------------------------------------------

show_menu() {
    clear
    echo "===================================================="
    echo "   Fedora Post-Install Script - Main Menu"
    echo "===================================================="
    echo "1. Install Everything (Recommended)"
    echo "2. Install Everything (No CachyOS Kernel)"
    echo "3. Optimize DNF"
    echo "4. Install Fonts"
    echo "5. Add Repositories (RPM Fusion)"
    echo "6. Install Software (DNF & Flatpak)"
    echo "7. Install CachyOS Kernel"
    echo "8. Install LinuxToys"
    echo "9. Install Shell Environment (Starship, MyBash)"
    echo "10. Install GNOME Extensions"
    echo "11. Install Discord"
    echo "12. Install 1Password"
    echo "13. Install Private Internet Access (PIA)"
    echo "14. Install Topgrade"
    echo "15. Install Antigravity App, IDE, and CLI"
    echo "16. Install P03 Kernel (experimental, not in Install Everything)"
    echo "0. Exit"
    echo "===================================================="
    read -p "Enter your choice [0-16]: " choice
}

# Run every installation step. Pass "skip_kernel" to leave out CachyOS.
run_all() {
    optimize_dnf
    install_fonts
    install_repos
    install_software
    install_discord
    install_1password
    install_PIA
    install_topgrade
    if [ "$1" != "skip_kernel" ]; then
        install_cachyos
    fi
    install_linuxtoys
    install_shell_env
    install_gnome_extensions
    install_antigravity
}

# Show which steps failed during this run, if any
print_summary() {
    log_info "----------------------------------------------------"
    if [ ${#FAILED_STEPS[@]} -eq 0 ]; then
        log_info "Post-install script completed successfully!"
    else
        log_warn "Post-install script finished with ${#FAILED_STEPS[@]} failed step(s):"
        for step in "${FAILED_STEPS[@]}"; do
            log_warn "  - $step"
        done
    fi
    log_info "Please restart your shell or run 'source ~/.bashrc' to see the changes."
    log_info "----------------------------------------------------"
}

# -----------------------------------------------------------------------------
# Main Execution
# -----------------------------------------------------------------------------

log_info "Starting Post-install script for Fedora..."
sleep 2

# Ensure sudo permissions are available upfront
sudo -v
while true; do sudo -n true; sleep 60; kill -0 "$$" || exit; done 2>/dev/null &

while true; do
    show_menu
    case $choice in
        1)
            run_all
            break
            ;;
        2)
            run_all skip_kernel
            break
            ;;
        3) optimize_dnf ;;
        4) install_fonts ;;
        5) install_repos ;;
        6) install_software ;;
        7) install_cachyos ;;
        8) install_linuxtoys ;;
        9) install_shell_env ;;
        10) install_gnome_extensions ;;
        11) install_discord ;;
        12) install_1password ;;
        13) install_PIA ;;
        14) install_topgrade ;;
        15) install_antigravity ;;
        16) install_p03 ;;
        0)
            log_info "Exiting..."
            print_summary
            exit 0
            ;;
        *)
            log_error "Invalid option. Please try again."
            sleep 2
            ;;
    esac

    if [ "$choice" != "1" ] && [ "$choice" != "2" ]; then
        read -p "Press Enter to return to the main menu..."
    fi
done

print_summary